Configuration Notes - Siemens optiPoint 500 Service Manual

Modules (Add-On Components) and Adapters
Modules (see Section 2.4 on page 2-9)
●
The optiPoint 500 operating panel (basic model and later versions) can be expanded
– using key modules with function keys
– a signature module or
– a busy lamp field
Adapters (see Section 5)
●
By using adapters in conjunction with telephones, specific workstation requirements can
be satisfied.
Additional devices can be directly connected to the workstation (e.g. PC, fax machines, tel-
ephones, headsets) by simply adding different adapters to the underside of the telephone.
2.2

Configuration Notes

Mixed optiset E/optiPoint 500 telephone configurations possible on U
●
Mixed optiset E/optiPoint 500 host/client configuration (phone adapter) possible
●
The options (key modules, adapters) for optiset E (5-volt technology) and optiPoint 500
●
telephones (3.3-volt technology) are not interchangeable
PC connection to optiPoint 500 via USB1.1 interface (except for the "entry" and "economy"
●
models)
– only possible with Windows 98 SE or Windows 2000 with USB support
– optiPoint 500 USB client interface, conforming to USB Specification 1.1
– USB cable with right-angle plug available for optiPoint 500 basic/standard/advance
– integrated USB1.1 interface replaces optiset E control/data adapter for CTI functions
– integrated USB1.1 interface replaces optiset E with ISDN adapter for modem, NDIS-
WAN miniport, and CAPI applications
CallBridge TU (PC software available free of charge) offers CTI platform for TAPI 2.1-
●
based CTI applications; CallBridge TA is also still available for optiset E adapter
CallBridge for Data offers NDISWAN miniport, CAPI 2.0, and ComPort/modem interface for
data applications
No firewall has been implemented - there could be a security risk if both a LAN port
7
and CallBridge for Data are installed.
P31003-E8400-A100-3-7620
Service Manual
Product Description
Configuration Notes
P0/E
2-3