Optipoint 500 Features At Hicom/Hipath - Siemens optiPoint 500 Service Manual

Product Description

optiPoint 500 Features at Hicom/HiPath

2.1 optiPoint 500 Features at Hicom/HiPath
Features when Connecting to Hicom and HiPath
Optiset E IDs for telephones and options must be used when connecting optiPoint500 to one
of the following systems:
HiPath AllServe 150
●
HiPath 3000
●
Hicom 150 E/150 H
●
Hicom 150 E/H Office
●
Hicom 300 E/300 H
●
Features
optiset E/optiPoint 500 mixed mode possible at SLMO.
●
optiset E/optiPoint 500 mixed mode possible for host/client configuration with phone adapt-
●
ers.
PC connection via integrated USB 1.1 interface (excluding entry) and special USB (client)
●
cables with right-angle plug.
CTI applications based on CallBridge TU for TAPI 2.1 available free of charge on the intra-
●
net (prerequisite: Windows 98 SE or Windows 2000).
In optiPoint 500 advance, only 12 of the 19 Hicom/HiPath function keys are configurable.
●
The remaining function keys can however be assigned destination call numbers via the op-
tiPoint menu.
Additional Features when Connecting optiPoint 500 to HiPath 4000
Support for the new optiPoint 500 IDs
●
Additional ring tones (16 instead of 8)
●
Call acceptance/cleardown function for "cordless" headsets
●
Mobile station" for optiPoint signature module
●
Busy lamp/door-opener control via a programmable key
●
Adjustable display contrast (4 levels)
●
2-2
P31003-E8400-A100-3-7620
Service Manual