Callbridge; Callbridge Tu - Siemens optiPoint 500 Service Manual
System-specific telephones, key modules, adapters, accessories, service providers
Hide thumbs
Also See for optiPoint 500:
- Information and important operating procedures (92 pages) ,
- Quick reference manual (40 pages) ,
- Specification (4 pages)
Table of Contents
Advertisement
6
CallBridge
optiPoint 500 basic, standard and advance models are equipped with a USB interface. This
provides a USB 1.1 (client) "plug and play" port on a PC with MS Windows 98SE/2000.
The USB cable (S30267-Z360-A30-*) with right-angle plug is required for connecting
>
optiPoint 500 to a Windows PC. This cable is not supplied with optiPoint 500.
6.1
CallBridge TU
The "Callbridge TU" program is ready for downloading. It sets up the connection from the PC
to optiPoint 500 and offers PC-supported telephony. The telephone user should contact his
system administrator for information on installing this program. This program is not installed by
default by the Siemens technician.
Callbridge TU software contains all TSP drivers for CorNet-TS, WS protocol and the TAPI
●
3.0 interface as the basis for customer-specific applications.
The documentation for CallBridge you can find under following link adress:
http://netinfo2.icn.siemens.de/e_doku/en/index.htm#hcab
P31003-E8400-A100-3-7620
Service Manual
CallBridge
CallBridge TU
6-1
Hide quick links:
Advertisement
Table of Contents
