Out Of Memory - Brother MFC-J220 User Manual

Error Message

Out of Memory

Paper Jam
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Wrong Paper Size
58
Cause
The machine's memory is full.
The memory card you are using
does not have enough free space
to scan the document.
Paper is jammed in the machine.
The machine has a mechanical
problem.
—OR—
A foreign object such as a paper
clip or ripped paper is in the
machine.
Paper is not the correct size.
Action
When copy operation is in progress, press
Stop/Exit and wait until the other
operations in progress finish and then try
again.
Delete unused files from your memory card
to make some free space and then try
again.
Open the Jam Clear Cover (at the back of
the machine) and pull out the jammed
paper by following the steps in Printer jam
or paper jam on page 61.
Make sure the paper length guide is set to
the correct paper size.
DO NOT extend the paper tray when you
load A5 or smaller size paper.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, see Transferring your faxes or
Fax Journal report on page 59 before
disconnecting the machine so you will not
lose any important messages. Then,
disconnect the machine from the power for
several minutes and reconnect it.
Check that the Paper Size setting matches
the size of paper in the tray. Load the
correct size of paper, and then press
Black Start or Color Start. (See Paper
Size on page 15.)