Setting Scanner Glass Size For Faxing; Color Fax Transmission; Canceling A Fax In Progress - Brother MFC-J220 User Manual

e
Press Black Start or Color Start.
Faxing from the ADF (MFC-J410W
only)
 The machine starts scanning the
document.
Faxing from the scanner glass
 If you press Black Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press 2 to
choose No(Send) (or press
Black Start again).
The machine starts sending the
document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
 If you press Color Start, the
machine starts sending the
document.
Note
To cancel, press Stop/Exit.
Setting scanner glass size for
faxing
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Press (FAX).
b
Press a or b to choose
Glass ScanSize.
Press OK.
c
Press a or b to choose A4 (or Letter).
Press OK.
Note
• You can save the setting you use most
often by setting it as default. (See Setting
your changes as the new default in
chapter 3 in the Advanced User's Guide.)
• This setting is only available for sending
documents from the scanner glass.

Color fax transmission

Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine's
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).

Canceling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialing or sending, press
Stop/Exit.
Sending a fax
4
4
4
4
23