Hide thumbs Also See for MFC-J220:

Advertisement

Quick Setup Guide
Start Here
Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.
WARNING
CAUTION
1
Unpack the machine and check the components
WARNING
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep
these bags away from babies and children.
Most of the illustrations in this Quick Setup Guide show the MFC-J410.
a
Remove the protective tape and film covering the machine, and also from the LCD.
b
Remove the plastic bag a containing the ink cartridges from on top of the paper tray.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
MFC-J220
MFC-J410
1
CEE-ENG Version 0
1

Advertisement

Table of Contents
loading

Summary of Contents for Brother MFC-J220

  • Page 1 Quick Setup Guide Start Here MFC-J220 MFC-J410 Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2 Fan the stack of paper well to avoid paper jams Load plain A4 paper and misfeeds. Check that the paper is flat in the tray. Pull the paper tray completely out of the IMPORTANT machine. DO NOT push the paper in too far. Lift the output paper tray cover.
  • Page 3: Install The Ink Cartridges

    Connect the power cord Install the ink cartridges and telephone line CAUTION IMPORTANT DO NOT connect the USB cable yet. If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. Connect the power cord.
  • Page 4: Check The Print Quality

    Take care to match the colour of the lever with Choose a Receive Mode the cartridge colour. Install each ink cartridge in the direction of the arrow on the label. There are four possible receive modes: Fax Only, Gently push the ink cartridge until it clicks. After Fax/Tel, Manual and External TAD.
  • Page 5: Enter Personal Information (Station Id)

    Set the date and time Set Tone or Pulse dialling mode Press Menu. Press Menu. Press a or b to choose Initial Setup. Press a or b to choose Initial Setup. Press OK. Press OK. Press a or b to choose Date&Time. Press a or b to choose Tone/Pulse.
  • Page 6 Set the phone line compatibility If you are connecting the machine to a VoIP service (over the Internet) you need to change the compatibility setting. Note If you are using an analogue telephone line you can skip this step. Press Menu. Press a or b to choose Initial Setup.
  • Page 7: For Usb Interface Users

    ® Windows For USB interface users ® (Windows 2000 Professional/XP/XP Professional x64 Edition/ ® ® Windows Vista /Windows Before you install Connect the USB cable Make sure that your computer is ON and you are logged on with Administrator rights. Install MFL-Pro Suite Put the supplied installation CD-ROM into your CD-ROM drive.
  • Page 8 XML Paper Specification The installation will continue automatically. documents. Please download the latest driver by The installation screens appear one after accessing the Brother Solutions Center at another. http://solutions.brother.com/ IMPORTANT DO NOT cancel any of the screens during the installation.
  • Page 9: Connect The Usb Cable

    Macintosh For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Connect the USB cable IMPORTANT IMPORTANT Make sure that the cable does not restrict the...
  • Page 10 Double-click the Start Here OSX icon to install. Please wait, it will take a few seconds for the software to install. After the installation, the Brother software will search for the Brother device. Choose the machine from the list, and then click OK.
  • Page 11: Install Optional Applications

    Install Optional Applications ® Windows Install FaceFilter Install FaceFilter Studio Studio/BookScan & Help Whiteboard Suite supported by Reallusion, To run FaceFilter Studio, go to start/All Programs/Reallusion/ FaceFilter Studio on your computer. IMPORTANT Click the button on the upper right corner of the screen. •...
  • Page 12 The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

This manual is also suitable for:

Mfc-j419

Table of Contents