Sending A Fax At The End Of A Conversation; Out Of Memory Message - Brother MFC-790CW User Manual

Chapter 5
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Mono Start or Color Start.
Press Send when you select the
Fax Mode to Advanced Mode and
send the fax from the scanner glass.
(See Setting the Fax Logic on page 29.)
d
Replace the handset.
42

Out of Memory message

5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
If you do not want to delete your stored
faxes to clear the memory, you can send
the fax in real time. (See Real time
transmission on page 39.)
5