Figure 2-7. Removing The Keyboard Cover - HP Pavilion zt1100 Service Manual

6. Disconnect the keyboard cover switch cable from the motherboard, and remove the cover from the
notebook.
Reassembly Notes
•
Make sure the keyboard cover switch cable is securely connected to the motherboard.
•
Bend the center of the keyboard cover upward slightly, and insert the tabs on the ends of the cover
into the slots in the notebook's case. Fit the hinge covers over the hinges, and gently press the
cover into place.
2-10 Removal and Replacement

Figure 2-7. Removing the Keyboard Cover

HP Pavilion zt1100/xz100 Omnibook xt1000