Changing The Thread Density (Only For Some Character And Frame Patterns); Specifying Multi-Color Text - Baby Lock Embroidery Professional PLUS BMP9 Instruction And Reference Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing the thread density
(only for some character and frame patterns)
The thread density for some character and frame
patterns can be changed.
A setting between 80% and 120% in 5%
increments can be specified.
1 Touch .
The screen shown below appears.
1
2
3
1 Selects a less thread density
2 Selects a more thread density
3 Touch this key to close this screen.
■ Selects a less thread density
Less Standard
■ Selects a more thread density
Less Standard
168
2 Touch the keys to select the desired thread
density.
Each touch of a key slightly increases or
decreases the thread density.
• To return to the original thread density
(standard), select "100%".
3 After making the desired changes, touch
The pattern editing screen appears again.

Specifying multi-color text

The alphabet pattern characters selected on
page 145 are set to black. The color of the
characters can be changed using the change thread
color key; however, to change the color of
individual characters, touch the Multi Color key to
turn it on, and then specify the color for each
character.
1 Touch
• Each touch of the key turns the setting
either on or off.
Multi-color text
turned off
More
• For details on changing the thread color,
refer to "Changing the colors of the
pattern" on page 169.
More
.
so that it changes to
Multi-color text
turned on
.