Creating An Appliqué Piece; Creating An Appliqué Piece - Baby Lock Embroidery Professional PLUS BMP9 Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Creating an Appliqué Piece
Appliqué pieces can be created from the built-in patterns and patterns on embroidery cards. This is
convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment.
Creating an appliqué piece
The following pattern will be used to create an
appliqué piece.
● Felt or denim fabrics are recommended to
make the appliqué piece. Depending on
the pattern and fabric used, lighter weight
fabrics may cause the stitching to appear
smaller.
● For best results, be sure to use stabilizer
material for embroidering.
● Select a frame that matches the pattern
size. Frame options are displayed on the
LCD screen.
● It is recommended to finish combining
and editing the pattern before selecting the
appliqué setting. If the pattern is edited
after selecting the basting setting, the
basting and pattern may become
misaligned, and the basting under the
pattern may be difficult to remove after
embroidering is complete.
● Since an outline is added, the pattern for
an appliqué piece (when the appliqué
setting is selected) will be larger than the
original pattern.
First, adjust the size and position of the
pattern as shown below.
1 Embroidering area
2 Approx. 10 mm
3 Pattern size
1 Touch
of the settings screen.
Note
, and then display page 2/5
2 Use and to specify the distance
between the pattern and the appliqué
outline.
Memo
● The setting remains selected even if the
machine is turned off.
3 Touch to return to the embroidering
settings screen.
Creating an Appliqué Piece 117
4