Changing the thread density (only for some
character and frame patterns)
The thread density for some character and frame patterns can
be changed.
A setting between 80% and 120% in 5% increments can be
specified.
a
Touch
.
The screen shown below appears.
1
1 Make the pattern less dense.
2 Make the pattern more dense.
3 Close this screen.
Selects a less/more thread density
Less
Standard
a
Touch the keys to select the desired thread density.
Each touch of a key slightly increases or decreases the
thread density.
• To return to the original thread density (standard),
select [100%].
b
After making the desired changes, touch
40
Designing repeated patterns
Using the border function, you can create an arrangement
using repeated patterns.
a
Select the pattern that you want to repeat and touch
b
Touch
c
Select the direction in which the pattern will be
repeated.
2
3
More
1 Vertical direction
2 Horizontal direction
The pattern direction indicator will change
depending on the direction selected.
d
Use
repeat the pattern on the right.
.
• To delete the left pattern, touch
• To delete the right pattern, touch
.
.
1
2
to repeat the pattern on the left and
to
.
.