Baby Lock Embroidery Professional PLUS BMP9 Instruction And Reference Manual page 131

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 Touch
The
the machine will stop.
1
1
Repeat steps
4
you wish to specify.
• Any number of pauses can be specified.
5 After specifying the desired settings, touch
.
mark appears to indicate where
mark
2 3
and for each pause that
.
• If the machine is temporarily turned off
when it is stopped at the specified location
after embroidering, you will be asked if you
wish to continue sewing or select a new
pattern when the machine is turned on
again.
Touch
(Refer to "Resume Embroidering After
Turning Off the Machine" on page 110.)
Memo
● If the machine is temporarily turned off,
the settings to stop the machine at color
changes specified before the machine was
turned off are not cancelled. However, the
settings are cancelled if a new pattern is
selected.
● If a pattern with the settings to stop the
machine at color changes is saved, the
settings to stop the machine at color
changes are also saved.
Setting the Machine to Stop at Color Changes 129
to continue embroidering.
4