Types Of Caps - Baby Lock Embroidery Professional PLUS BMP9 Instruction And Reference Manual

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Types of caps

With the machine, we recommend that the
following types of caps be embroidered.
■ Standard (Pro Style)
1 Face: Pro style
2 6 sections
Otto
International,
Inc. cap model OTTO27-007
number
(Example)
Mesh backing
on the back of Constructed
front panels firm front
(soft or hard)
Ease of framing Easy
(hooping) (Recommended)
Backing 1 to 2 ply
■ Low Profile (Low fitting)
1 Face: Low fitting
2 6 sections
Otto
International,
Inc. cap model OTTO23-225
number
(Example)
Mesh backing
on the back of Constructed
front panels firm front
(soft or hard)
Very difficult
Ease of framing (because the
(hooping) cap material
is very hard.)
Backing 1 to 2 ply
224
■ Golf Style
International,
Inc. cap model
(Example)
Mesh backing
on the back of
front panels
(soft or hard)
Ease of framing
(hooping)
Unconstructed
soft crown
Fairly easy
2 to 3 ply
OTTO18-203
Unconstructed
soft crown
Fairly easy
2 to 3 ply
1 Face: Not divided
2 5 sections
Otto
OTTO23-225
number
Constructed
firm front
Fairly easy
Backing 1 to 2 ply
Memo
● Check if this area 1 is covered with mesh.
Note
● There is no centerline that can be used as
a guide for placing the cap in the cap
frame. Before framing the cap, use a
charcoal pen to mark the centerline.