Table of Contents
Advertisement
USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK
Creating an Appliqué from an
Embroidery Pattern
The procedure for cutting out an embroidered
piece along the outline or desired shape to create
an applique is described below.
Memo
• For details on making an appliqué, refer to
"Appliqué Sewing" in chapter 7 of your
machine's Instruction and Reference Guide.
■ Creating an appliqué with the
outline around a pattern
a
Set the embroidery machine to Cutwork
mode and turn it off. Turn the machine
back on after inserting the cutwork needles.
(page 11, 12)
b
After selecting the pattern, touch
embroidering settings screen.
→ The pattern settings screen appears.
20
c
3
3
b
a
in the
Touch
, and make sure
highlighted.
With the "Appliqué Distance" keys, specify the
distance of the appliqué outline from the embroidery
pattern.
a Appliqué key
b Outline tab
c Appliqué Distance keys
d Distance between appliqué outline and pattern
edge
Note
• Grayed-out keys are unavailable for use in
this operation. Available keys vary
depending on the cutout design and the
specified settings.
Memo
• "Appliqué Distance" can also be specified
on page 2 of the Settings screen.
is
c
Advertisement
Table of Contents
