Park; Prog; Rngof; Sac - Avaya IP Office 44/46/64xx User Manual

4400, 4600 and 6400 series telephones
Hide thumbs Also See for IP Office 44/46/64xx:
Table of Contents

Advertisement

Page 30 - Admin Functions

Park

Park a call against another extension. This function can be programmed with or without
a target extension number.
If programmed with a target extension number, pressing the DSS key when on a call
will park that call against the target extension number.
If programmed without a target extension number, pressing the DSS key when on a
call allows entry of a target extension number before parking the call against that
extension.
The parked call indication received at the target extension will depend on the phone
type. If the call remains parked for too long it will ring at the target extension.

Prog

Program and relabel the default softkey functions. Program a telephone number to dial
against a DSS key (see Storing Abbreviated Dialing Under a DSS Key on page 25.

RngOf

Switches the phones audible ringer on/off. This function does not require any data
entered when programmed. The appropriate DSS key lamp is lit whilst this function is
on. Pressing the DSS key again turns the function off.

SAC

Switches do not disturb on/off. This function does not require any data entered when
programmed.
When on, the appropriate DSS key lamp is lit and N is shown on the display. All caller's
receive busy tone or are diverted to the user's voicemail if enabled. Pressing the DSS
key again switches off do not disturb.

Spres

Replace the display of dialed digits with s characters. This function does not require
any data entered when programmed. When this function is on, the appropriate DSS
key lamp is lit.

Timer

Starts a timer running on the phone's display. This function does not require any data
entered when programmed. The timer is reset whenever a new call is made or
answered. When timer mode is selected the appropriate DSS key lamp is lit.

TmDay

Replaces the user name and number details on the phone display with the date and
time. This function does not require any data entered when programmed.
When on the appropriate DSS key lamp is lit.
Page 30 - DSS Key Functions
Admin Functions
44/46/64xx & TransTalk MDW 9040 User's Guide
40DHB0002UKEG – Issue 10 (9th February 2004)
DSS Key Functions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents