Conference Not Started - Avaya IP Office Conferencing Center 3.0 Installation And Administration Manual

11. Click Save & Make Live on the toolbar.

Conference Not Started

This sample failure route will define the action taken by the system when a participant dials into a
conference that has yet to start. Again, this is only a sample route in which the conference participant is
played a message stating that the conference has yet to start.
To set up this failure route:
1. Create a recording similar to the following:
• "Sorry, the conference you are trying to join has not started yet. Please call back later."
2. Click Basic Actions on the tool bar and select
3. Click in the right-hand pane to place the action.
4. Open the Properties for
• Change the Token Name to Play NotStarted.wav.
•
In the Entry Prompts tab, click the
wav file you created in step 1.
• Click Close and OK.
5. Connect Conference Not Started to
6. Click Telephony Actions on the tool bar and select
7. Click in the right-hand pane to place the action.
8. Connect Play NotStarted.wav to
9. Click Save & Make Live on the toolbar.
Generic.
(green cross), click
Play NotStarted.wav.
Disconnect.
Additional Configurations
Generic.
and select the name of the
Disconnect.
23