Area
Firmware Version
PBX Model Code
3.5
Access Levels
There are 2 main levels of access to the Maintenance Console software: Installer and User.
Installer-level users can view and edit all settings, in addition to choosing the options and screens available
to User-level users, through the 7.3 Screen Customize option in the View menu.
It is necessary to enter the Installer-level password to log on to Maintenance Console at Installer level.
However, User level access may or may not require a password, depending on whether one has been set
in Programmer Code Change. (See 7.2 Programmer Code Change)
Access to menu options within Maintenance Console also depends on the current software mode (See 3.3
Software Modes).
The target users for each access level are as follows:
Level
User
Installer
3.6
Standard Buttons
There are several standard buttons that are displayed on most screens within Maintenance Console, and
perform the same function on each screen.
The standard buttons are as follows:
Button
OK
Cancel
Apply
Help
Values
Ver x.x.x xxxxxxxxxxxx
(e.g., Ver 1.0.0
Y591AA030519)
M
Use
For end users
For dealers or system installers
Function
Implements changes and closes the current screen.
Abandons changes and returns to the previous screen.
Implements changes and remains on the same screen.
Displays the relevant help topic for the current screen.
Description
Displays the version number of the PBX
software. The numbers following are the ROM
version and the date of creation.
Displays the model code assigned to the PBX.
3.5 Access Levels
Programming Manual
85