4.
Click Next.
The Step 3 screen will be displayed.
5.
Enter the desired extension number and name (if required) for each jack to configure in the table.
•
If you do not want to configure extension numbers and names, deselect the check box.
6.
Click Next.
The Step 4 screen will be displayed.
7.
For each outside (CO) line, select the ringing assignment.
•
Select "All extensions" to have all extensions ring for calls from that outside (CO) line.
•
Select a jack number to have only that extension ring for calls from that outside (CO) line.
•
If you do not want to configure a particular outside (CO) line, deselect the check box beside the
name of that line.
8.2 Quick Setup
Programming Manual
115