2.2 PT Programming—Procedures
Feature Manual References
1.1.94 Paging—All Extensions & External
1.1.95 Paging—External
[107] DTMF Receiver Check
Enables each DTMF receiver to check whether it is operating normally or not.
1
0
7
Notes
DTMF receiver number:
1–2: checking extension jacks 01–08
3–4: checking extension jacks 09–16
5–6: checking extension jacks 17–24
Installation Manual References
4.1.3 Operation
[108] Flash/Recall Mode for a Locked Extension
Enables a locked extension to send a flash/recall signal during a conversation with an outside party.
1
0
8
Feature Manual References
1.1.55 Extension Lock
1.1.107 Remote Extension Lock
[109] CO Indicator
Enables the corresponding PTs to answer incoming outside (CO) line calls. The CO button indicator will
flash when an outside (CO) line call is received. If this program is enabled, a PT user can answer the call
by pressing the flashing CO button. If this program is disabled, the user cannot answer the call even if he or
she presses the CO button.
1
0
9
Conditions
•
This program is available for the extension(s) assigned not to ring in [408-410] Flexible Ringing—
Day/Night/Lunch, to answer incoming outside (CO) line calls.
Programming Manual References
[408-410] Flexible Ringing—Day/Night/Lunch
26
Programming Manual
NEXT
DTMF receiver no.
NEXT
(1 ... 6/
NEXT
SELECT
(Enable/ Disable)
NEXT
SELECT
( Enable/Disable)
or
PREV
To continue
name*
SELECT
STORE
)
( Enable/Disable)
STORE
END
STORE
END
END