Call Pickup Tone; Pulse Restriction; Redialing After Pulse To Tone Conversion; Ringback Tone Pattern - Panasonic KX-TA824 Programming Manual

2.2 PT Programming—Procedures

[117] Call Pickup Tone

Enables the PBX to send a confirmation tone when the Call Pickup feature is activated.
1 1 7
Feature Manual References
1.1.20 Call Pickup, Directed
1.1.21 Call Pickup, Group

[118] Pulse Restriction

Enables the PBX to send pulse dialing to the telephone company during a conversation with an outside
party when "Pulse" or "Call Block" mode is enabled in [401] Dial Mode.
1 1 8
Programming Manual References
[401] Dial Mode

[119] Redialing after Pulse to Tone Conversion

Enables the PBX to send DTMF dialing to the telephone company when an extension user redials after
changing from pulse mode to DTMF mode by pressing " #".
1 1 9
Feature Manual References
1.1.104 Pulse to Tone Conversion
[125] TRS Check for * and #
Enables TRS to check for the user-dialed digits " " and "#". This is useful in preventing some unauthorized
calls.
1 2 5
Feature Manual References
1.1.117 Toll Restriction (TRS)

[128] Ringback Tone Pattern

Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls
(including a DISA call).
1 2 8
28 Programming Manual
NEXT SELECT STORE
( Enable/Disable)
NEXT SELECT STORE
( Enable/Disable)
NEXT SELECT STORE
(Enable/ Disable)
NEXT SELECT STORE
( Enable/Disable)
NEXT SELECT STORE
(Single 3 s/ Single 5 s/
Double 3 s/Double 5 s)
END
END
END
END
END