[421] CPC Signal Detection—Outgoing
Enables the PBX to detect a CPC signal from outgoing outside (CO) line calls. If disabled, CPC signal
detection is only activated during an incoming outside (CO) line call.
4
2
1
NEXT
Programming Manual References
[420] CPC Signal Detection—Incoming
Feature Manual References
1.1.31 Calling Party Control (CPC) Signal Detection
[422] Disconnect Time
Selects the length of the disconnect signal sent from the PBX to the telephone company or host PBX.
4
2
2
NEXT
Conditions
•
The time you select must be longer than the requirements of your telephone company or host PBX.
Feature Manual References
1.1.60 Flash/Recall
or
NEXT
PREV
CO line no.
SELECT
(1 ... 8/
)
(Enable/
Disable)
SELECT
or
NEXT
PREV
CO line no.
SELECT
(1 ... 8/
)
(0.5/ 1.5/4.0 s)
SELECT
2.2 PT Programming—Procedures
To continue
STORE
END
To continue
To continue
STORE
END
To continue
Programming Manual
45