Panasonic KX-TA824 Programming Manual page 135

• Parity Bit: Space, Word Length: 8 bits, Stop Bit: 2 bits
If any of the above invalid combinations are selected, an error message will be displayed.
Default
1 bit
Value Range
1 bit, 2 bits
Programming Manual References
[800] SMDR RS-232C Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
SMDR Format—Page Length
Selects the number of lines per page in order to match the paper size being used by the printer.
Notes
To enable the changes, you must turn the power switch of the PBX off and back on again or reset the
PBX (→ 8.3.1 Normal) after changing this setting.
Default
66 lines
Value Range
4–99 lines
Programming Manual References
[801] SMDR Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
SMDR Format—Skip Perforation
Selects the number of lines to be skipped at the end of every page in order to match the paper size being
used by the printer.
Notes
To enable the changes, you must turn the power switch of the PBX off and back on again or reset the
PBX (→ 8.3.1 Normal) after changing this setting.
Default
0 line
Value Range
0–95 lines
9.1 System [1]
Programming Manual 135