Dhcp; Dhcp Settings - TP-Link TL-MR3020 User Manual

MAC Address - The connected wireless station's MAC address
Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP /
AP-DOWN / Disconnected.
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.

5.7 DHCP

Figure 5-26 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 5-26 ): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
5.7.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", and then you can configure the DHCP Server on the
page (shown in Figure 5-27).The Router is set up by default as a DHCP (Dynamic Host
TL-MR3020
Figure 5-25 The Router attached wireless stations
Portable 3G/3.75G Wireless N Router
-143-