TP-Link TL-MR3020 User Manual page 208

Method Three:
Step 1: Click the Enable WPS button in Figure 6-2, and then click Add device; the following
screen will appear.
Step 2: Choose "Press the button of the new device in two minutes" and click Connect.
Step 3: For the configuration of the wireless adapter, please choose "Push the button on my
access point" in the configuration utility of the WPS as below, and click Next.
The WPS Configuration Screen of Wireless Adapter
Step 4: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
TL-MR3020
Figure 6-3 Add A New Device
-198-
Portable 3G/3.75G Wireless N Router