Network - TP-Link TL-MR3020 User Manual

6.5 Network

Figure 6-4 the Network menu
There is one submenu under the Network menu (shown in Figure 6-4): LAN. Click it and you
will be able to configure the LAN function.
The Network option allows you to customize your local network manually by changing the
default settings of the AP.
Selecting Network will enable you to configure the IP parameters of Network on this page.
MAC Address - The physical address of the AP. The value can't be changed.
Type - Select Dynamic IP to get IP address from DHCP server or select Static IP to
configure IP address manually from the drop-down list.
IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default
setting is 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.
Note:
1 If you change the IP Address, you must use the new IP Address to log in the AP.
2 If the new LAN IP Address you set is not in the same subnet with the IP Address pool of
DHCP sever, the IP Address pool will not take effect until it is re-configured accordingly.
TL-MR3020 Portable 3G/3.75G Wireless N Router
Figure 6-5 LAN
-202-