TP-Link TL-MR3020 User Manual page 254

5) The following TCP/IP Properties window will display and the IP Address tab is open on this
window by default.
Now you have two ways to configure the TCP/IP protocol below:
Note:
In AP mode, the DHCP is disabled by default; so when you turn the mode switch of the Router to
AP mode and have it work in AP mode, you have to Set IP address manually in order to log in
the web-based management page.
Setting IP address automatically
Select Obtain an IP address automatically, and choose Obtain DNS server
automatically, as shown in the Figure below:
TL-MR3020 Portable 3G/3.75G Wireless N Router
Figure B-2
-244-