TP-Link TL-MR3020 User Manual page 211

The WPS Configuration Screen of Wireless Adapter
Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as
Figure 6-2.
You will see the following screen when the new device has successfully connected to the
network.
Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled.
Please make sure the Wireless function is enabled before configuring the WPS.
TL-MR3020 Portable 3G/3.75G Wireless N Router
-201-