TP-Link TL-MR3020 User Manual page 209

The WPS Configuration Screen of Wireless Adapter
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my AP
Step 1: Click the Enable WPS button in Figure 6-2, and then click Add device; the following
screen will appear.
Step 2: Choose "Enter the new device's PIN" and enter the PIN code (take 16952898 for
example) of the wireless adapter in the field as shown in the figure above. Then click
Connect.
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen as shown in
the following figure.
TL-MR3020 Portable 3G/3.75G Wireless N Router
-199-