TP-Link TL-MR3020 User Manual page 227

•
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9,
1)
a-f, A-F, zero key is not permitted) or 5 ASCII characters.
For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of
2)
0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.
For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of
3)
0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
WPA/WPA2 – Personal (Recommended) - Select WPA based on pre-shared key.
•
Version - You can select one of following versions.
Automatic (Recommended) - Select WPA-Personal or WPA2-Personal
1)
automatically based on the wireless station's capability and request.
WPA-Personal - Pre-shared key of WPA.
2)
WPA2-Personal - Pre-shared key of WPA2.
3)
•
Encryption - When you select WPA-Personal or WPA2-Personal for Authentication
Type, you can select either Automatic (Recommended), TKIP or AES as Encryption.
•
PSK Passphrase - Enter a passphrase here.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
Note:
You will be reminded to reboot the device after clicking the Save button.
TL-MR3020 Portable 3G/3.75G Wireless N Router
-217-