Step 4. Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
By PIN
II.
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1. Click the Enable WPS button in Figure 5-2 , and then click Add device; the following
screen will appear.
TL-MR3020
The WPS Configuration Screen of Wireless Adapter
Portable 3G/3.75G Wireless N Router
-118-