Interface Grouping - TP-Link TD-W8960N User Manual

TD-W8960N
Select the checkbox and click Save/Apply to enable the UPnP function.

4.4.14 Interface Grouping

Choose "Advanced Setup" "Interface Grouping", you can configure multiple ports to PVC and
bridging groups to perform as an independent network.
To support this feature, you must create mapping groups with appropriate LAN and WAN
interfaces using the Add button. The Remove button will remove the grouping and add the
ungrouped interfaces to the Default group. Only the default group has IP interface.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-61
Figure 4-62
61