Interface Grouping - TP-Link TD-W8970 User Manual

TD-W8970

4.5.3 Interface Grouping

Choose "Network""Interface Grouping", you can view all the current groups on this page
(shown in Figure 4-14).
To support this feature, you must create mapping groups with appropriate LAN and WAN
interfaces using the Add button. The Remove button will remove the grouping and add the
ungrouped interfaces to the Default group. Only the default group has IP interface.
Click the Add button. You can add a new interface group in the next screen. For example, you
want LAN1 and LAN3 to be a group called Group 1 over br_8_35_1 WAN interface, you can refer
to the following figure.
Click Save to make the entry effective immediately
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-13
Figure 4-14
Figure 4-15
28