TP-Link TD-W8960N User Manual page 56

TD-W8960N
Click the Add button in Figure 4-43, and you can configure the QoS queue entry on the next
screen as shown in Figure 4-44.
Name: Set a name for the entry.
Enable: Select Enable option to take this entry effect.
Interface: Assigned a specific Wan Service for this QoS queue entry.
Precedence: Specify precedence for this QoS queue entry.
DSL Latency: Select latency path for the type of data transmission, only Path0 is available for
this Router.
After you specify the condition, click Save/Apply to save the entry and then you will see you
settings as shown in Figure 4-43.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-43
Figure 4-44
49