TP-Link TD-W8960N User Manual page 36

TD-W8960N
6. Select a preferred WAN interface as the system default gateway and click Next.
7. Configure the DNS Server Addresses on the screen as follows.
Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
8. On the next screen (as shown Figure 4-19) you will see the detailed settings you've made.
Please click the Apply/Save button to save these settings.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-17
Figure 4-18
29