Access Control - TP-Link TD-W8960N User Manual

TD-W8960N
WAN Interface used by TR-069 Client: Please select the WAN Interface from the drop-down
list to perform this function.
Connection Request User Name: Type the Connection Request User Name, set it yourself.
Connection Request Password: Type the Connection Request Password, set it yourself.
Note:
The Connection Request User Name and Connection Request Password used for ACS log on the
Router and manage it.
Select the desired values and click Save/Apply to configure the TR-069 client options.

4.7.5 Access Control

Choose "Management" "Access Control" "Password", you can see the screen (shown in
Figure 4-109) which allows you to change the factory default password of the Router. The default
password is the same as the user name, which is admin/admin, support/support, and user/user
respectively.
To change the password:
1. Select the Username whose password you want to change.
2. Enter the Old Password in the text box.
3. Enter the New Password and Confirm Password. The Confirm Password should be the
same as the New Password.
4. Click Save/Apply to make your change take effect.
Note:
1) Access to your DSL Modem Router is controlled through three user accounts: admin, support,
and user. The user name "admin" has unrestricted access to change and view configuration of
your DSL Modem Router. The user name "support" is used to allow an ISP technician to
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-109
97