Table of Contents
Advertisement
To end the Vertu Feeds application:
To close the Vertu Feeds application and return to the Home screen, either
press the [End] key from any of the application pages, or select Hide (right
[Selection] key) from the landing page of the application.
At this time, when either of the keys is selected, you can confirm that the screen
of Vertu Feeds application is now replaced with the Home screen. However,
note that this does not completely stop the application from continuously
updating the feed contents of VERTU
the background. To completely stop the background updating as well, you need
to select Options » Disable feeds from the landing page or from the top page
of
(a screen showing the list of all RSS channels registered).
Other options / features available in Vertu Feeds:
With the Vertu Feeds application, you can also use the following features
or options:
To manually update the feed contents of all RSS channels, select Options » Update
>
from the landing page or from the top page of
To change the application settings, select Options » Settings from the landing page
>
or from the top page of
Activate images: Select whether to download images when they are
>
included in the feed contents.
Activate links: Select whether to activate the URL links when included
>
in the feed contents. Selecting Off will disable all links and present them
as text.
Automatic update: Select how often the whole feed contents are to be
>
updated. You can select any of the three options: 1 hour, 6 hours or
Once a day. If you select Off, the application will not try to update the
feed contents at all.
To hide the already read contents or mark all feed contents as read, select Options
>
from the full page view of VERTU
channel, and then select Hide read items or Mark all items read.
To change the name of a 3rd party feed channel, go to the top page of
>
move the cursor to the desired RSS channel, and then select Options » Rename.
To temporarily stop updating any feed contents associated with a specific 3rd party
>
channel, select Options » Feed subscriptions from the top page of
, move the cursor to the desired RSS channel, and then select Unsubs... (the
[Joystick] key, centre) and select Yes.
32
and
channels, in
.
, and then select the following:
or from the full page view of each
Using your Vertu phone
Making / receiving calls
You can make or receive a call simply following the procedure below.
To make a call:
1. Make sure that your Vertu phone is in a strong signal area and the battery
is charged fully enough. (Refer to "Status indicators" on page 19)
2. From the Home screen, press the Number keys (page 18) to enter a
phone number.
3. Press the [Send] key (page 18) to begin your call.
Tip: If the called party is the one who has already been registered in
Contacts, you can smoothly start your call just by selecting that person
from the Contacts list and then pressing the [Send] key. If you have not
changed the default configuration, you can launch the Contacts list by
just giving a short press on the [Joystick] key (Down) from the Home
screen.
Or you can also use the All calls log. The log list can be displayed just
by pressing the [Send] key from the Home screen, or if you have not
changed the default configuration, by pressing the [Joystick] key (Left).
To receive a call:
When you receive an incoming call, a call message appears on the display,
and a ringing tone is played when an incoming call alert has been enabled.
Your Vertu phone will also vibrate if you have set a vibrating alert.
1. When you have a call, select Silence (right [Selection] key) to stop the
ringing tone first.
2. To answer the call, either press the [Send] key (page 18) or press the
[Joystick] key (Centre) when you see Answer on the screen.
,
Advertisement
Table of Contents
