Punch In/Out Using The Keys On The Top Panel - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Punch in/out)

Punch in/out using the keys on the top panel

You can make punch in/out manually by using the [RECORD] and [PLAY] keys on the MR-8HD/
CD top panel.
The punch in/out operation by yourself using the keys on the top panel sometimes
<Note>:
prevents you from concentrating on playing. In such a case, ask someone to operate the MR-
8HD/CD, or use either of the other two punch in/out methods described later.
1
1) Press the [REC SELECT] key for the track you
are going to make punch in/out recording.
The track is record-armed.
2) Locate the recorder to the point before the punch-
in point and press the [PLAY] key to start
playback.
It may be a good idea to play the instrument
along with the playback sound, so that you can
get the tempo and feel.
3) When the recorder reaches at the point you want
to punch in, press the [RECORD] key while holding
down the [PLAY] key (see <Important note> below>).
The armed track is punched in (i.e. starts
recording).
INPUT A SELECT
INPUT A INPUT B INPUT C INPUT D
BAL BAL BAL BAL
UNBAL
/GUITAR INSERT UNBAL UNBAL UNBAL
DISTORTION TRIM TRIM TRIM TRIM
MAX LINE
MIN MIC LINE MIC LINE MIC LINE MIC
GUITAR
PEAK PEAK PEAK PEAK
ON/ ON/ ON/ ON/
OFF OFF OFF OFF
TO STEREO BUSS
DYNAMIC CONDENSER TUBE MIC SIMULATION
INPUT A
AMP SIMULATION
BRIT STACK US METAL 60'S COMBO
EFFECT SEND
0 10 0 10 0 10
0 10
PAN
L R L R
L R L R
1 2 3 4 5/6 7/8
MAX
MIN
Press the [RECORD] key
while holding down the [PLAY] key.
(Punch in)
Playback
STEREO OUT
L R
PHONES
1 2
PHONES VOL
MIN MAX
POWER
RHYTHM TIME BASE
EFFECT
GUIDE SELECT CONTRAST
REVERB / DELAY TIME
1-4 > 5/6 NEW STEREO
1-8 > SONG 7/8 >
1-6 > 7/8 WAV FILE
MIN MAX
ROOM HALL
BOUNCE
ABC1 DEF2 GHI3
NATURAL BRIGHT
POWERFUL
PLATE DELAY
MASTERING
JKL4 MNO5
LOCATE
AUTO PUNCH PLAY MODE A / IN B / OUT
REC SELECT
PQR6 STU7 VWX8 YZ9
MASTER
MAX
STOP PLAY
RECORD
LOCATE REC END
LOCATE ABS ZERO
MIN
A-B PLAY
2,4
Press only the [PLAY] key.
(Punch out)
Recording
Playback
<Important note>
You cannot punch in by only pressing the
[ RECORD ] key. You need to hold down the
[ PLAY ] key when pressing the [ RECORD ] key.
4) When the recorder reaches at the point you want
to punch out, press only the [PLAY] key.
The recorder status switches from recording
to playback.
5) Press the [STOP] key to stop the recorder.
6) Rewind the recorder and play back the part you
performed the punch in/out recording to check
the result.
If you are not satisfied with the result, use the
undo function to cancel the punch in/out
recording and try again.
52
MENU / ENTER
UNDO/REDO
STORE
+-_0 DELETE
3
REWIND F FWD