Selecting The Desired Song - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Song management)
The following describes how to select the desired song from the disk when more than one song
is created on the disk. You can also create a new song by the similar procedure. See "Basic
operations" (page 31) for details about how to create a new song.
1) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
highlighted initially (selecting "
returns to the previous screen).
2) Rotate the [MENU/ENTER] knob to select "Song ",
and press the [MENU/ENTER] knob.
The display now shows the song menu screen,
where " Back" is highlighted.
3) Rotate the [MENU/ENTER] knob to select
"Select Song " and press the [MENU/ENTER]
knob.
The display now shows the song list screen.
The screen example above shows that four
songs are currently created on the hard disk.
The song list is shown on a single page.

Selecting the desired song

Back" is
Back"
When more songs are created, the song list
screen has more than one page, and you can
scroll the list by rotating the [MENU/ENTER]
knob.
"- - - :(New Song)" at the bottom of the screen is
used when you create a new song.
4) Rotate the [MENU/ENTER] knob to select the
desired song number/song name, and press the
[MENU/ENTER] knob.
The display returns to the song menu screen,
where "Select Song " is highlighted.
5) Press the [STOP] key to exit the menu mode.
The display shows the home screen of the
selected song.
98