Trouble For Effect; Trouble For Usb Connection - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Troubleshooting)
<Trouble 1>
I cannot apply the effects.
• Are the [EFFECT SEND] control for the track
you want to apply the effect and track fader
raised appropriately?
0 10 0 10 0
Raise the [EFFECT SEND] control(s) for the track(s)
(1 through 4) you want to apply the effect to send
signal(s) to the internal digital effects.
Also, make sure that the fader(s) for the track(s)
you want to apply the effect is(are) raised.
Troubles for USB connection
<Trouble 1>
Cannot export a WAV file to a personal computer.
• Is the USB cable connected correctly?
Check the connection, as well as the USB cable.
• Is the personal computer meets the
requirement?
The MR-8HD/CD can export a WAV file to a
personal computer which runs on any of the
following OS systems.
Windows Me, 2000 or XP
Macintosh 0S X or higher
Troubles for effect
EFFECT SEND
10 0 10
<Trouble 2>
I cannot apply the mic simulation effects.
• Is the [INPUT A SELECT] switch on the rear
panel is set to "MIC/LINE" position?
INPUT A SEL
To apply the mic simulation effects to [INPUT A], the
[INPUT A SELECT] switch on the rear panel must
be set to "MIC/LINE" position.
When you set the switch to any other position, you
can use the amp simulation effects for insert effects.
<Trouble 2>
The MR-8HD/CD drive icon is not shown on the per-
sonal computer screen.
• It may take some times for showing a
removable drive depending on a personal
computer.
It may take some times for reading the drive data.
Wait for a while until the drive icon appears.
On a Windows machine, the MR-8HD/CD is shown
as "removable drive". On a Macintosh machine, it is
shown as "MR-8HD/CD".
134
GTR CLEAN MIC/LINE
GTR DIST