Other Settings; Restoring The Factory Settings; Formatting A Compactflash Card; Checking The Capacity Of The Card - Tascam SS-R1 Owner's Manual

Restoring the factory settings

You can restore the menu settings and other settings to
their factory-set condition.
You cannot restore these settings if a CompactFlash card is
inserted.
Remove the CompactFlash card before you perform the
following menu operation. (For details on menu operations,
refer to "Operations in the menu screens" on page 16.)
1 Press the key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.
3 Select the FACTORY PRESET item.
A confirmation popup will appear.

Formatting a CompactFlash card

When the SS-R1 is stopped, you can format the entire
CompactFlash card to FAT format.
Before a CompactFlash card used by another device can be
used with the SS-R1, you must format it on the SS-R1.
NOTE
When you format a card, all folders and files stored
on that card will be deleted.
Perform the following menu operations. (For details on
menu operations, refer to "Operations in the menu screens"
on page 16.)
1 Press the key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.

Checking the capacity of the card

Here's how to check the capacity of the currently-inserted
CompactFlash card.
Perform the following menu operations. (For details on
menu operations, refer to "Operations in the menu screens"
on page 16.)
1 Press the key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.
9 − Other settings 9 − Other settings
NOTE
If you select the FACTORY PRESET item when a
CompactFlash card is inserted, a popup of
will appear, and your selection will not be
SELECT
accepted. Remove the card and perform the operation
once again.
4 Once again press the front panel
(or the remote's
ENTER
The settings will be reset.
5 Press the key (or the remote's
TIME (ESC)
key) to return to the home screen.
CLR/ESC
3 Select the MEMORY FORMAT item.
A confirmation popup will appear.
4 Once again press the front panel
(or the remote's
ENTER
The card will be formatted.
During execution, the display will indicate
5 Press the key (or the remote's
TIME (ESC)
key) to return to the home screen.
CLR/ESC
3 Select the INFORMATION item.
The capacity of the card will be displayed.
4 Press the key (or the remote's
TIME (ESC)
key) to return to the home screen.
CLR/ESC
,
CAN T
dial
MULTI JOG
key).
dial
MULTI JOG
key).
.
F ormat

TASCAM SS-R1