Appendix C Sas-733Tq Backplane Specifications; Esd Safety Guidelines; General Safety Guidelines - Supero SC733 Series User Manual

SAS-733TQ Backplane Specifications
Safety Information and Technical Specifications
C-1 Safety Guidelines
To avoid personal injury and property damage, please carefully follow all the safety
steps listed below when accessing your system or handling the components:

ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic
bag.
•
Handle the backplane by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the card and peripherals back into their antistatic bags when not in use.

General Safety Guidelines

•
Always disconnect power cables before installing or removing any components
from the computer, including the SAS-733TQ backplane.
•
Disconnect the power cable before installing or removing any cable from the
SAS-733TQ backplane.
•
Make sure that the SAS-733TQ backplane is securely and properly installed on
the motherboard to prevent damage to the system due to power shortage.
SAS-733TQ Backplane Specifications
Appendix C
C-1