Installing Hard Drives In The Sc733I Model Chassis - Supero SC733 Series User Manual

4-3

Installing Hard Drives in the SC733i Model Chassis

Figure 4-2: Removing the Hard Drive Module
The SC733i chassis must be powered-down before hard drives can be removed
from the hard drive carriers.
Replacing Hard Drives in the SC733i Chassis
1. Disconnect the chassis from any power source.
2. Remove the two screws securing the hard drive module to the chassis.
3. Gently slide the hard drive module out of the chassis.
Chapter 4: Chassis Setup and Maintenance
2
Remove
Screws
4-3
3