Supero SC733 Series User Manual page 24

SC733 Chassis Manual
Drive Carrier
The drives are mounted in drive trays to simplify their installation and removal from
the chassis. These trays also help promote proper airflow for the drive bays.
!
Figure 4-6: Removing Dummy Drive from the Drive Carrier
Installing the Hard Drive into the SC733T and SC733TQ Hard Drive Carriers
1. Remove the two screws securing the dummy drive to the drive carrier and
remove the dummy drive. Place the hard drive carrier on a flat surface such
as a desk, table or work bench.
Figure 4-5: Chassis Drive Carrier
Warning: Except for short periods of time (swapping hard
drives), do not operate the server with the chassis drive bays
empty.
1
4-6
Dummy Drive
1