Table of Contents
Advertisement
SC733 Chassis Manual
Changing the Power Supply
1.
Disconnect the chassis from any power source.
2.
Remove the screws securing the power supply to the chassis, which are
located on the rear of the chassis.
3.
Pull the power supply out of the chassis.
4.
Change the failed power module with the same model.
5.
Push the new power supply module into the power bay until you hear a click.
6.
Plug the AC power cord back into the module and power up the server.
Power
Supply
Figure 4-14: Removing the Power Supply
4-16
Advertisement
Table of Contents
