How To Insert A Disc And Begin Play; How To Stop And Restart The Cd Player - Ford Vehicle Owner's Manual

Once a disc is inserted, operation of the CD
player will override that of the radio.
NOTE: The volume, bass, treble, balance and
fader controls on the radio are also
used with the CD player. Refer to
earlier operating instructions on these
controls.

How to insert a disc and begin play

Insert one disc, label side up into the disc
opening. When inserted, the disc automatically
loads into the unit and play starts at the
beginning of the first track (selection).
When the disc reaches the end, the disc player
automatically returns to the beginning of the
disc and resumes playing.
NOTE: Once a disc is inserted, the disc
opening is secured to prevent the
accidental insertion of a second disc.
NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167˚F (75˚C), the heat detection circuit
will shut off the player and "TOO
HOT" will scroll in the display for
approximately five seconds (radio will
resume playing). When the temperature
returns to normal operating range, the
CD player will again be operational.

How to stop and restart the CD player

When a disc is loaded, the unit automatically
enters the play mode and the play indicator a
illuminates. To stop temporarily, press the
"PLAY/STOP" button or the "AM/FM" button.
The stop indicator X in the display illuminates
and operation returns to the radio mode. To
147