Using The “Audio” Button To Adjust The Tone Balance And Speaker Output - Ford Vehicle Owner's Manual

now in the "AUTO" mode and this display
will show "AUTO" each time a preset is
activated.
NOTE: If there are fewer than five strong
stations in the frequency band, the
remaining unfilled buttons will store
the last strong station detected on the
band.
After all stations have been filled, the radio
will begin playing the station stored on
memory button 1.
To deactivate the Auto Memory Store mode
and return to the manually-set memory
button stations (or those stations set using
Auto Memory Load), simply push the
"AUTO PRESET" button. Display will show
"AUTO" then "OFF". The next time Auto
Memory Store is activated on that band, the
radio will store the next set of five strong
stations.
Using the "AUDIO" button to adjust the
tone balance and speaker output
Increasing or decreasing bass response
Push the "AUDIO" button repeatedly until
the display reads "BASS." Push the "+" side
of the "VOL" button to increase bass (more
"lows"), and push the "-" side to decrease
bass (less "lows").
Increasing or decreasing treble response
Push the "AUDIO" button repeatedly until
the display reads "TREB." Push the "+" side
of the "VOL" button to increase treble (more
"highs"), and push the "-" side to decrease
treble (less "highs").
144