Using The Controls On Your New Compact Disc Player - Ford Vehicle Owner's Manual

F series
Hide thumbs Also See for Vehicle:
Table of Contents

Advertisement

When in the CD mode, push the "CLOCK"
button to change the display from elapsed time
mode to track number mode to clock mode. If
the CD track selection is changed when you are
in the clock or elapsed time mode, the new track
number will be displayed for approximately ten
seconds and then revert back to the previous
mode.
The clock can also be viewed with the ignition
off. Push the "CLOCK" button and the time will
be displayed momentarily.
To set the clock, simultaneously press the
"CLOCK" button and either the bottom ( b ) half
of the "SEEK" button to set hours, or the top
( a ) half of the "SEEK" button to set minutes.
Using the Controls on Your New Compact
Disc Player
Your new Ford Compact Disc Player is capable
of playing 12 cm or 8 cm discs, without an
adapter! The Player operates when the power is
on and a disc is inserted (label side up). Handle
the disc by its edge only. (Be sure to read and
follow all of the care and cleaning instructions
under How To Take Care of and Clean Your CD
Player and Discs.
NOTE: If after you insert a disc, the disc is
ejected and "ERROR" begins scrolling
in the display, remove the disc and
reinsert it right side up (label side up).
The digital display on your CD player will
either show the track (selection) number or the
elapsed time. (The display mode can be selected
by pressing the "CLOCK" button.) Indicators for
play ( a ), stop ( X ) and compression on ("C")
are also in the display. (These features are
described later.)
146

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents