Clock Operation - Ford Vehicle Owner's Manual

Adjusting speaker balance
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the "AUDIO" button
repeatedly until the display reads "BAL."
Push the "+" side of the "VOL" button to
shift the sound to the right speakers, and
push the "-" side to shift the sound to the
left speakers.
Adjusting speaker fader
Fade control allows you to adjust the sound
distribution between the front and rear
speakers. Push the "AUDIO" button
repeatedly until the display reads "FADE."
Push the "+" side of the "VOL" button to
shift the sound to the front speakers, and
push the "-" side to shift the sound to the
rear speakers.
NOTE: Illuminated bars in the display show
relative levels of bass and treble and
positions of speaker balance and fader
functions after adjustments are made,
then revert to volume level set.

Clock operation

When in the radio mode, push the "CLOCK"
button to switch from radio frequency to clock.
Only the clock numerals will be displayed in the
clock mode — there is no A.M./P.M. indication.
When in the clock mode, the time will be
displayed until the button is pushed again.
However, if you retune the radio while it is in
the clock mode, the new radio frequency will be
displayed for approximately ten seconds and
then change back to clock.
145