Hazard Flasher - Ford Vehicle Owner's Manual

In freezing weather, the washer solution
may freeze on the windshield and obscure
your vision. Always warm up the
windshield with the defroster before you
use the washer fluid. If you cannot see
through the windshield clearly, it can
increase the risk of being involved in a
collision.
For information about refilling the washer fluid
or replacing your windshield wiper blades, see
Windshield washer fluid and Wipers in the Index.

Hazard Flasher

The hazard flasher is used to alert other drivers
to hazardous situations.
The flashers will continue to flash with the brake
pedal depressed.
The flashers work whether your vehicle is
running or not. The flashers work for up to two
hours when the battery is fully charged and in
good condition without draining the battery
excessively. If the flashers run for longer than
two hours or if the battery is not fully charged,
the battery can be drained.
To use the hazard flasher:
1. Push in the flasher button; it will pop out
and the lamps will begin to flash.
2. To stop the flashers, push in the flasher
button again.
NOTE: The flasher button will be sticking up
slightly higher when ON than when
OFF.
RWARNING
99