Using The Rear Bench Seat (Supercab Only); To Return Seat To Normal Seating Position - Ford Vehicle Owner's Manual

Rear Bench Seat (SuperCab Only)
The forward facing rear seat in the SuperCab
forms a cargo floor when folded.
To fold the seat:
1. Move the front seat forward if necessary.
2. Pull the strap at the passenger's side of the
seat bottom and pivot the seat assembly
forward (180 degrees).
3. Raise the release lever at the top of the seat
back on the passenger's side of the vehicle,
and lower the seat back.

Using the rear bench seat (SuperCab only)

To return seat to normal seating position:

1. Lift the seat back until it locks in the vertical
position.
2. Check to see if the seat back is securely
latched by pulling forward on the top of the
seat back.
3. Grasp the seat bottom and pivot rearward
(180 degrees).
4. Check to see if the seat bottom is securely
latched by pulling up on the rear portion of
the seat bottom.
125